Locate and Leverage Your 19 FXDR OBD2 Port with CANsmart™ Controller

For Harley-Davidson FXDR 114 owners, unlocking your bike’s full potential just got easier. Understanding how to access and utilize your 19 Fxdr Obd2 Port is the first step towards seamlessly integrating advanced accessory control. This diagnostic port is not just for mechanics; it’s your gateway to customizing your ride experience with the DENALI CANsmart™ Controller.

The DENALI CANsmart™ Controller is engineered to communicate directly with your Harley-Davidson’s CANbus electrical system via the diagnostic port. For 2019 FXDR 114 models, this means a straightforward, plug-and-play connection to access a wealth of programmable features for your aftermarket accessories. Forget complex wiring and relays; the CANsmart system simplifies everything.

Finding Your OBD2 Port on a 2019 FXDR 114

Locating the OBD2 port on your 2019 Harley-Davidson FXDR 114 is typically a simple process. While specific locations can slightly vary, it’s commonly found in an easily accessible area, without requiring extensive disassembly. You should check your owner’s manual for the definitive location, but generally, look for the diagnostic port:

  • Under the seat: This is a frequent location for diagnostic ports on many motorcycles. You may need to remove the seat to gain access.
  • Side Cover Area: Inspect under the side covers, particularly on the left side of the motorcycle. The port might be tucked away but should be easily reachable once the cover is removed.

Once you’ve located your 19 FXDR OBD2 port, you’re ready to connect the DENALI CANsmart™ Controller and begin customizing your motorcycle’s accessory functions.

Intelligent Accessory Control for Your FXDR 114

Connecting the CANsmart Controller to your 19 FXDR OBD2 port opens up a world of intelligent control over your accessories. Imagine having seamless integration with your bike’s existing controls, allowing you to operate aftermarket lights, horns, and more, all through your Harley’s factory switches.

The CANsmart Controller offers a range of impressive features, all accessible after connecting to your 19 fxdr obd2 port:

  • High/Low Beam Synchronization: Control your auxiliary driving lights to switch between high and low intensity in sync with your factory headlight, enhancing visibility without fumbling with extra switches.
  • Independent Dimming: Adjust the brightness of two separate sets of lights for optimal visibility in both day and night riding conditions, directly from your handlebar controls.
  • Modulated Lighting: Increase your presence on the road by setting your auxiliary lights to modulate, making you more noticeable to other drivers.
  • Flash-to-Pass Feature: Instantly grab attention in critical situations by strobing your auxiliary lights with a quick flick of your high beam switch.
  • Smart Braking Features: Enhance safety with deceleration-activated brake lights and customizable flash patterns, ensuring you’re seen by drivers behind you. The “Smart Brake” technology uses real-time vehicle speed to activate auxiliary brake lights even before you apply the brakes.
  • Horn Strobe: Link your horn to your auxiliary lights, causing them to strobe when you sound the horn for maximum auditory and visual alerting.
  • Turn Signal Integration: Program your auxiliary lights to cancel or flash with your turn signals, improving visibility during turns and lane changes.
  • Plug & Play Horn Installation: Easily connect high-powered aftermarket horns like the DENALI SoundBomb™ without the need for complex wiring harnesses.
  • Switched Power Outlets: Get clean, switched 12V power for any accessory that needs to be powered on and off with your ignition, perfect for GPS units, heated gear, or phone chargers.

Seamless Installation on Your 2019 FXDR 114

The CANsmart Controller is designed for easy installation. By utilizing the 19 fxdr obd2 port, it eliminates the need for cutting, splicing, or complicated wiring diagrams. Simply plug the CANsmart into your FXDR’s diagnostic port, and you’re ready to configure your accessories using the CANsmart Accessory Manager Software.

The kit includes all the necessary connectors and adapters to ensure compatibility with your 2019 FXDR 114 and a wide range of accessories. Whether you’re adding DENALI auxiliary lights, a SoundBomb horn, or even Harley-Davidson genuine accessories, the CANsmart Controller provides a central, intelligent control hub.

Unlock Your FXDR’s Potential with CANsmart™

For 2019 Harley-Davidson FXDR 114 riders looking to enhance their motorcycle’s functionality and safety, the DENALI CANsmart™ Controller is the ultimate upgrade. By connecting to your 19 fxdr obd2 port, you gain access to a suite of customizable control features that seamlessly integrate with your bike and accessories. Ride with greater confidence and control, knowing you have intelligent technology working for you.

Take command of your ride and explore the possibilities with the DENALI CANsmart™ Controller. Visit our website to learn more and take the first step towards a smarter, more customized riding experience.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *