Unlock the full potential of your 2013 Obd2 vehicle with the P3 V3 Gauge, the ultimate plug-and-play digital multi-gauge. Seamlessly integrating into your car’s interior, this advanced gauge provides real-time monitoring of crucial engine parameters, ensuring peak performance and proactive diagnostics. Designed for ease of use and comprehensive data access, the P3 V3 Gauge is the perfect upgrade for any 2013 OBD2 compliant vehicle owner looking to stay ahead of the curve.
Key Features of the P3 V3 Gauge for 2013 OBD2 Vehicles
The P3 V3 Gauge is packed with features designed to enhance your driving experience and provide critical insights into your vehicle’s operation. Specifically engineered for compatibility with 2013 OBD2 systems, it offers:
- Effortless Plug and Play Installation: Get up and running in minutes! The P3 V3 Gauge connects directly to your 2013 OBD2 port, making installation a breeze. For those who need constant OBD2 port access, a hard-wire harness kit is also available.
- OEM Vent Integration for a Sleek Look: Maintain a factory-fresh aesthetic. The gauge is designed to install directly into your OEM vent, providing a clean, integrated look without compromising airflow.
- Unmatched Versatility in Data Acquisition: Whether you prefer using your 2013 vehicle’s original sensors via the OBD2 port or want to add enhanced precision with the optional P3 analog boost sensor, this gauge adapts to your needs.
- On-Demand Diagnostic Trouble Code (DTC) Reading and Clearing: Take control of your vehicle’s health. Read and clear diagnostic trouble codes instantly, directly from the gauge, empowering you to address issues promptly.
Comprehensive Performance Readouts for 2013 OBD2 Systems
The P3 V3 Gauge delivers a wealth of real-time data from your 2013 OBD2 vehicle, presented in easily digestible formats. Each readout is fully configurable, allowing you to choose between Imperial or Metric units to suit your preference. Monitor critical parameters including:
- Boost Pressure: Track your engine’s boost levels accurately, either through your 2013 OBD2 vehicle’s sensors or with the optional P3 analog boost sensor for enhanced accuracy.
- Coolant Temperature: Keep a close eye on your engine’s coolant temperature to prevent overheating and ensure optimal performance.
- Air/Fuel Ratio (AFR) or Lambda: Monitor your engine’s combustion efficiency, with readings available in both AFR and Lambda for comprehensive analysis.
- Vehicle Speed: Verify your speed with a digital readout, which can be calibrated in 1% increments from -9% to +20% for precision.
- Intake Air Temperature (IAT): Monitor the temperature of the air entering your engine, a key factor in performance and efficiency.
- Throttle Angle: Observe your throttle input in real-time, providing insights into engine responsiveness.
- Ignition Timing: Keep track of ignition timing, a critical parameter for engine performance and tuning.
- Engine RPM: Monitor your engine speed accurately for optimal gear selection and performance analysis.
- Exhaust Gas Temperature (EGT): (Availability may depend on 2013 OBD2 vehicle sensor compatibility) Monitor exhaust gas temperature to ensure safe operating conditions, especially under heavy load.
- Battery Voltage: Keep tabs on your vehicle’s battery health to prevent electrical issues.
- Programmable Shift Light: Customize your shift points with the integrated programmable shift light, optimizing performance and preventing over-revving.
- Dual Analog Inputs: Expand your monitoring capabilities with two 0-5 volt linear analog inputs, allowing you to connect and display readings from additional sensors.
- Precision Acceleration and Braking Timers: Measure your vehicle’s performance with built-in timers for 0-60mph, 0-100mph, 60-130mph acceleration, and 60-0mph, 100-0mph braking.
Seamless OEM Vent Integration
Enjoy a hassle-free installation with the OEM vent option. We expertly install the P3 V3 display into a genuine OEM vent, ensuring a perfect fit and finish in your 2013 OBD2 vehicle’s interior. This option simplifies installation while maintaining a factory-like appearance.
Built for Durability and User Experience
The P3 V3 Gauge is engineered to withstand the rigors of the automotive environment. Rigorously tested in extreme conditions, from freezing temperatures to intense heat, the gauge is designed to perform reliably in any climate your 2013 OBD2 vehicle encounters. Its bright, clear display ensures readability at a glance, providing crucial information without distracting from driving. User-friendly controls allow you to customize settings and access data effortlessly, making the P3 V3 Gauge a valuable tool for both daily driving and performance tuning.
Need Assistance?
For detailed installation guides and configuration information, please visit our V3 install page. If you require further assistance, our expert support team is ready to help. Click on the live chat option or call us directly at (614) 317-3035.
