Locating the OBD2 port in your 1999 Honda CRV can sometimes be a bit tricky. Unlike newer vehicles where the location is often obvious, older models might have it tucked away. If you’re trying to diagnose your CRV’s check engine light or use a scan tool, finding this port is your first step. This guide will help you pinpoint the OBD2 location on your 1999 CRV.
Common OBD2 Port Locations in a 1999 CRV
While the standard OBD2 port is generally located under the dashboard on the driver’s side for most vehicles, the 1999 CRV might have a slightly different placement. Here’s what to look for:
- Under the Dashboard (Driver’s Side): This is the most common location. Look beneath the steering wheel column and around the area above the pedals. You might need to crouch down and look upwards.
- Passenger Side Consideration: In some instances, particularly in older models or specific configurations, the OBD2 port could be located on the passenger side. Check under the glove compartment area, looking for a similar port as you would on the driver’s side.
- Look for the Connector Shape: The OBD2 port is a 16-pin, D-shaped connector. It’s usually black or grey.
An example image of a typical OBD2 port location under the dashboard in a vehicle.
Step-by-Step Guide to Find Your 1999 CRV OBD2 Port
- Start on the Driver’s Side: Begin your search under the dashboard on the driver’s side. Use a flashlight to get a better view in the darker areas.
- Feel Around: Sometimes the port might be slightly recessed or behind a small panel. Gently feel around under the dash for the 16-pin connector.
- Check the Passenger Side: If you don’t find it on the driver’s side, move to the passenger side and inspect under the glove compartment area.
- Look for a Bracket or Holder: The OBD2 port is often mounted in a bracket or holder. You might spot a plastic or metal bracket that secures the port.
- Inspect for Loose Connectors: If you find a bracket but no port, it’s possible the connector has been dislodged. Look around the bracket area for any loose wires and the OBD2 connector.
- Consult Your Owner’s Manual: Although it’s not always detailed, your 1999 CRV owner’s manual might offer a hint about the diagnostic port location.
Still Can’t Find It?
If you’ve thoroughly checked both sides and still can’t locate the OBD2 port, consider these possibilities:
- Hidden Location: In rare cases, it might be behind a trim panel. However, for a standard OBD2 port, this is less likely.
- Damaged or Removed Port: It’s uncommon, but the port could be damaged or, in very rare situations, removed. Check for any signs of damage or tampering in the expected locations.
Finding the OBD2 port is crucial for diagnosing any potential issues with your 1999 Honda CRV. By following these steps, you should be able to locate it and proceed with your vehicle diagnostics. Remember to be patient and thorough in your search.
