Every modern vehicle, including the 2019 Jeep Cherokee, is equipped with an On-Board Diagnostics II (OBD2) port. This port is essential for accessing your vehicle’s computer system for diagnostics and maintenance. Finding the OBD2 port is the first step in using a diagnostic scanner to read trouble codes or monitor your Jeep Cherokee’s performance. While the OBD2 port is standardized, its location can sometimes be a bit tricky to pinpoint. This guide will help you quickly locate the OBD2 port in your 2019 Jeep Cherokee.
The OBD2 port is a 16-pin connector, and by law, it must be located within the passenger compartment of your vehicle. For the 2019 Jeep Cherokee, you can typically find the OBD2 port located inside the cabin on the driver’s side.
More specifically, you should look for the OBD2 port in the area underneath the dashboard. It is usually situated at knee level, just below the steering wheel column. You might need to look under the dash and around the lower dashboard trim panels to spot it. The port is often dark in color, and you can identify it by its trapezoidal shape and the 16 pin slots inside. It’s designed for easy access, so you shouldn’t need any tools to reach it.
Once you’ve located the OBD2 port in your 2019 Jeep Cherokee, you can connect a compatible OBD2 scanner or diagnostic tool. This will allow you to read diagnostic trouble codes (DTCs), check engine light warnings, access live sensor data, and perform various diagnostic tests on your vehicle’s systems. Whether you’re a seasoned DIY mechanic or a Jeep Cherokee owner wanting to understand your vehicle better, knowing the OBD2 port location is a valuable piece of information.
In conclusion, the OBD2 port in a 2019 Jeep Cherokee is generally located under the dashboard on the driver’s side, near the steering column. Locating this port is straightforward and allows you to tap into your vehicle’s diagnostic capabilities for efficient maintenance and troubleshooting.
